Munchy Range
Munchy invented the Dual-Diameter Screw and were amongst the first to develop a dedicated plastics recycling system.
Today the Munchy method is recognised for the high quality of the pellet produced.
The Munchy Range is designed around this proven concept but with the additional advantages of modern design, manufacturing techniques and energy efficient technologies.
The result is a non-intrusive unit that is clean, simple and cost efficient to operate and maintain.
Due to the high quality of the pellet produced using the Munchy method the pay-back on each unit is extremely quick.
Technical Specification / Brochure
Munchy invented the Dual-Diameter Screw.
This enables scrap plastic to be fed directly into the machine without the need for any size reducing operation.
This minimises the thermal degradation of the material and therefore produces the highest quality pellet.
It is recognised the pellet produced using a Munchy system is far superior than any alternative making Munchy the preferred recycling system of the Blown Film Industry.
The Munchy range is capable of recycling a wide range of materials and material forms including
- PE - Polyethylene
- PP - Polypropylene
- LLDPE - Linear Low Density
Polyethylene - LDPE - Low Density Polyethylene
- MDPE - Medium Density
Polyethylene - HDPE - High Density Polyethylene
(Surlyn as a co-ex) - OPP - Orientated Polypropylene
- BOPP - Bi-Orientated
Polypropylene - PP RAFFIA - Polypropylene Raffia
- PS - Polystyrene
- EPS - Expanded Polystyrene
- HIPS - High impact Polystyrene
- ABS - Acrylonitrile Butadiene
Styrene - PC - Polycarbonate
- PVC
- PA - Nylon blends
The Munchy Range has been designed to have as small as footprint as possible with many units being able to be positioned directly on-line where needed.
The Munchy is very easy and quick to clean down to avoid any cross-contamination when switching scrap etc.
Pellets can be cooled by air or water depending upon the polymer and output required.
The Munchy has been designed to operate with minimum noise levels and minimum dust particles for clean production environments.
The Munchy can fed in a number of differing ways dependent upon the material specifications.
Scrap can be fed from rolls, edge trims or loose - feeding can be undertaken using any one of these methods at the same time.
All Munchy Recycling Machines have been designed to allow the operator to undertake all routine maintenance without the need for specialised personnel.
The Munchy is designed to be as energy efficient as possible for low cost operation.
Direct Drive AC Flux Vector Technology ensures maximum power transmission allowing for more power from a smaller motor as well as virtually maintenance free operation.
Got a question?
Just ask